一、自动双称敞口包装机概述

微信图片_202009070822304.jpg

自动敞口包装机的给料形式有叶轮给料和螺旋给料两种形式,前者适宜在颗粒相对较大的物料包装,后者更适宜颗粒相对较小的物料包装。

1、 Overview of automatic open packaging machine

The former is suitable for packing materials with relatively large particles, and the latter is more suitable for packing materials with relatively small particles.

敞口自动称重包装机主要采用自动称重计量灌装,变频控制快、慢加料,称重仪表提前量 自动修整,对于物料密度变化和料仓压力变化斗能计量准确;配有自动缝包机和皮带输送机,操作放遍;敞口定量灌装机可将物料自动灌装于阀口袋(悬挂式)、敞口袋、编织袋及桶,一机多用,体积小功能大。

The open automatic weighing packaging machine mainly adopts automatic weighing and metering filling, frequency conversion control, fast and slow feeding, weighing instrument automatic trimming in advance, accurate measurement for material density change and silo pressure change, equipped with automatic sewing machine and belt conveyor, operation can be repeated; Open quantitative filling machine can automatically fill materials into valve pocket (hanging type), open bag, woven bag and barrel. It has many functions, small volume and large function.

新型的敞口式干粉砂浆包装机,由于采用更大口径的灌装管,加快初期灌装速度,减少堵管现象,增加了对物料的适应范围,包装速度加快;而后期流动速度的多级联控,快速降低物料流速,保证了包装精度。包装口加装除尘罩,有效减少粉尘扩散,改善工作环境。按出料口数量可分为:单称敞口包装机双称敞口包装机

The new type of open type dry powder mortar packaging machine, due to the use of larger diameter filling pipe, speeds up the initial filling speed, reduces the pipe blocking phenomenon, increases the adaptability of materials, and accelerates the packaging speed; and the multi-stage joint control of the later flow speed can quickly reduce the material flow rate and ensure the packaging accuracy. The dust cover is installed at the packing port to effectively reduce the dust diffusion and improve the working environment. It can be called open packaging by single machine.

二、自动敞口包装机结构特点

微信图片_202009070822303.jpg

该机械是新型包装产品,已在全国多家建材厂使用,并深受用户欢迎,该机有如下特点。

1.采用电脑计量装置,称量准确、性能稳定、操作简单;

2.机身全部密封并配有除尘口,结构合理、经久耐用,真正实现环保型生产;

3.体积小、重量轻、调整维修方便;

4.机电一体、节约电能,该机能自动实现包装袋的压紧、松开、闸板的关闭和掉袋等功能;

5.该敞口包装机用途广泛。该机不仅用于干粉砂浆包装,也可用于其它流动性能好的粉状、颗粒状物料的包装;

6.变频控制快、慢加料,称重仪表提前量 自动修整,对于物料密度变化和料仓压力变化斗能计量准确。

2、 Structural features of automatic open packaging machine

This machine is a new type of packaging product, which has been used in many building materials factories all over the country and is well received by users.

1. It adopts computer measuring device, which has the advantages of accurate weighing, stable performance and simple operation;

2. The fuselage is fully sealed and equipped with dust removal port, which is reasonable in structure and durable in service, and truly realizes environmental protection production;

3. Small size, light weight, convenient adjustment and maintenance;

4. Mechanical and electrical integration, energy saving, the machine can automatically realize the functions of packing bag pressing, loosening, RAM closing and bag dropping;

5. The open packaging machine is widely used. This machine is not only used for packing dry mortar, but also for packing other powder and granular materials with good fluidity;

6. Frequency conversion control for fast and slow feeding, weighing instrument automatic trimming in advance, accurate measurement for material density change and silo pressure change.

三、选材方式

根据物料使用情况可以选配普通碳钢和不锈钢等材质。一般情况下可分为整机碳钢、接触物料部份不锈钢、整机全不锈钢三种。如果物料腐蚀性太大,可以选用不锈钢材质。

3、 Selection method

According to the use of materials, ordinary carbon steel and stainless steel can be selected. Generally, it can be divided into three types: complete machine carbon steel, stainless steel contacting material part and whole machine stainless steel. If the material is too corrosive, stainless steel can be used.

四、自动敞口包装机适用范围

广泛用于干粉砂浆、水泥、腻子粉、石粉、煤灰粉、石膏粉、重钙粉、石英砂、消防材料等粉状物体的定量包装。

4、 Application scope of automatic open packaging machine

It is widely used for quantitative packaging of powder objects such as dry powder mortar, cement, putty powder, stone powder, coal ash powder, gypsum powder, heavy calcium powder, quartz sand, fire-fighting materials, etc.