自动开箱机使用简介及特点

阅读:279次    日期:2020-09-30
 

一、自动开箱机产品基本介绍:

山东艾利特中舜智能装备有限公司自动开箱机适用于纸箱的自动成型,自动折纸盖,自动胶带封底盖之功能,经济又高效,是较为理想的纸箱自动成型封底之设备。

自动开箱机

1、 Basic introduction of automatic unpacking machine:

Shandong alite Zhongshun Intelligent Equipment Co., Ltd. the machine is suitable for automatic carton forming, automatic folding cover and automatic tape back cover. It is economical and efficient, and is an ideal equipment for automatic carton forming and sealing.

二、自动开箱机主要技术参数:

开箱宽度: 150mm-400mm

开箱高度: 100mm-350mm

开箱长度: 200mm-450mm

台面高度: 600mm-720mm

外型尺寸: L2000mm×W1900mm×H1450mm

封箱速度: 20m/min

适用电源: 220v/380v  56/60Hz

气压源供应: 5.5-6kg/cm2

适用胶带: W(48,60,72)mm×L1000y

机械重量: 400kg

这只是其中一款机型,还可根据您的要求来定制。

2、 Main technical parameters of automatic unpacking machine:

Box width: 150 mm-400 mm

Opening height: 100 MM-350 mm

Box length: 200 mm-450 mm

Table height: 600mm-720mm

Dimension: l2000mm × w1900mm × h1450mm

Sealing speed: 20m / min

Applicable power supply: 220 V / 380 V 56 / 60 Hz

Air pressure supply: 5.5-6kg/cm2

Applicable tape: w (48,60,72) mm × l1000y

Mechanical weight: 400kg

This is only one of the models. It can be customized according to your requirements.

三、技术特点:

1.采用4组日本SMC吸盘,并能精确调整定位,使纸箱打开平稳,大幅度提高开箱合格率,避免纸箱折叠报废。

2.双气缸结合摆臂折盖,解决了单气缸平衡以及力度不够引起折盖不到位的情况。

3.涡轮式硅橡胶帖带轮,有极高弹性,解决了以其他设备采用塑料帖带轮引起贴带翅角或不平的情况。

4.采用触摸屏人机界面操作,故障显示,自动报警,操作简单。

5.德国西门子PLC控制,确保设备稳定运行。

3、 Technical features:

1. Four sets of Japanese SMC suction cups are adopted, and the positioning can be adjusted accurately, so that the carton can be opened smoothly, the qualified rate of unpacking can be greatly improved, and the carton folding and scrapping can be avoided.

2. Double cylinder combined with swing arm folding cover can solve the problem that single cylinder balance and insufficient strength cause the cover not in place.

3. The turbine type silicone rubber taping wheel has high elasticity, which can solve the problem that the wing angle or unevenness is caused by the plastic taping wheel used in other equipment.

4. Touch screen man-machine interface operation, fault display, automatic alarm, simple operation.

5. Siemens PLC control ensures stable operation of the equipment.